single color pad printer for shoe heel

Printing leather result on shoe heel surface by pad printer with clear vein, symmetry, and balance. That can reduce the cost of shoe heel, improve outside profile. the pad printer is the main crafts in internatinal. It is suitable for printing high and small shoe heel suface.

1.      SCM IC complile action program,kinds of printing model options

2.      Auto 4-digit counter built-in,and stat. Printing quantity

3.      Airframe adopts coin alloy,and metal coating surface

4.      enclosing with auto-cleaning printing head equipment, you can set the time and quanlity of cleaning

5.      unique leather result, by overprinting color can up to real leather result

6.      full series of printing head for shoe heel

7.      Worktable,plastic head and ink tray can be adjusted X.Y.Z direction

8.      Sucking ink and the pressure of printing pad can be adjusted independently .

9.      The distance of scratching ink is adjustable

10.  It has function of leveling ink by sliding automatically on front /back,this can avoid printing ink partial solidification

11.  The speed of all the cylinders have an independent regulator intortum

12.  Adopts original Japan SMC and Taiwan MINDMAN pneumatic component

13.  Each adjustable location has scale logo

14.  it has the function of forbiding the pad fallen when no air pressure enter into

15. The machine is running fastly,it is steady and low voice

﹡steel plate size: 150*200mm

﹡printing speed: 300pair/hr

﹡power: 220V 50-60HZ 150W

﹡air pressure: 5-7bar

﹡Action model option: fully automatic | semi-automatic | Self-Programming | manual

﹡Start-up method:panel | foot switches

﹡Scraper working style:Pneumatic mechanical valve drives cylinder up and down

﹡scraper pressure controller: by pressure regulating Valve

﹡transversa distance：200MM

﹡vertical distance：120MM

﹡Max.printing area：150*100MM

﹡the usage of pad: 1500-2000pair

﹡repeat precision: <0.05MM

﹡Printing workstation: 1PCS

﹡Fixuping clamp method：T-slot table, code pressure compress heavily

﹡Choosing the material of clamp: Automobil Putty | wood

﹡Plastic fastness style: by wooden bolt

1. You can convert ink tray system into ink cup system, choosing thin steel borad and imported dycril plate

2.  you should prepare printing head, steel plate and clamp according to your printed products

3.  preparing ink, and liquid (for diluting ink)